civil engineering measurement and unit conversion factors.
Measurement is one of the most important aspects of civil engineering and without measurements, we can not start any construction work.
Here I have listed some basic measurement factors that are most commonly used in Unit conversion in Civil Engineering. Hope it will help you with your work.
1) List of Unit Conversion – Length
1 cm=10 mm
1 m= 100 cm
1m =1000 mm
1m =1.09 yard
1m =3.28 feet
1m =39.37 inch
1km=1000 m
1km=100000 cm
1km=1000000 mm
1km=0.62 mile
1 km=1093.6 yard
1km=3280.84 feet
1km=39370 inch
1 km=0.53 nautical mile
1m=3.2808 feet
1km =1000 m
1mile=1.609 km
1 feet= 12 inch
1 inch= 2.54 cm
1 yard= 3 feet
2) List of Unit conversion – Weight
1 gm=1000 mg
1 kg=1000 g
1 ton=907.1 kg
1 tonne=1000 kg
1 stone=6.35 kg
1 stone=14 pounds
3) List of Unit Conversion – Area
1 sq cm=100 sq mm
1 sq m=10000 sq cm
1 sq m=10.7639 sq ft
1 sq m=1.1959 sq yard
1 sq m=1550 sq inch
1 acre=0.004 sq km
1 acre=4046.8 sq m
1 acre=0.0015 sq mile
1 acre=4840 sq yard
1 acre=43560 sq ft
1 acre=40 Guntha
1 acre=0.4046 hectare
1 ha=10000 sq m
1 ha=0.01 sq km
1 ha=10000 sq m
1 ha=0.00386 sq mile
1 ha=11959.9 sq yard
1 ha=107639 sq ft
1 ha=2.4711 acres
4) List of unit conversion – Volume
1 cum=1000 lit
1 cum=35.314 cu ft
1 cum=61023 cu inch
1 lit=1000 ml
1 lit=33.8 fluid ounce
1 lit=0.264 gallon
1 lit=0.001 cum
1 lit=0.035 cu ft
1 lit=61.023 cu inch
1 Cu ft =1728 Cu inch